AquaForte Complete Plug & Swim pallet Biopool type 4

The ideal solution for professional and compact filtration of a natural swimming pool. This filtration system comes fully pre-assembled on a plastic pallet with a rear panel made of HDPE. Only the power cable needs to be connected to the distribution box. The system is suitable for natural swimming pools of ±80 m³ or (koi) ponds up to 40 m³. Thanks to the self-priming pump, the unit can be installed both above or below ground. ECOLOGICAL FILTRATION Sustainable filtration through optimal use of water, energy, and water treatment products. Environmentally friendly and cost-efficient in operation. WATER SAVING The bead filter is cleaned mainly using a blower, meaning only a limited amount of water is lost during backwash. This water is 100% reusable for garden irrigation. ENERGY SAVING Optimal water flow thanks to the low resistance of the filter, allowing the same filtration volume with lower energy consumption. With the variable speed pump, energy use is further reduced. NO CHEMICALS Disinfection through UV-C and algae control is based on phosphate removers and liquid beneficial bacteria. These bacteria also break down most organic waste in the water. This system is 100% biological and safe for ponds with fish. SAFE AquaForte puts the health of swimmers and the environment first. Creating healthy, clear, and clean swimming water is the main goal of this filtration system. TECHNICAL SPECIFICATIONS • 3 x inlet 63mm with ball valves for the pre-filter, • 3 x return 63mm, individually adjustable with Ø63mm ball valves, • Bypass system for heat pump with 63mm ball valves, • Bypass for Phospat cartridge filter with 63mm ball valves, • 1 x extra large pre-filter (8 litres!) with easy-clean filter basket, • 1 x AquaForte Inverpro VS WiFi pump, • 1 x AquaForte UltraBead UB-60 filter, • 1 x AquaForte Signal 75W UV-C, • 1 x AquaForte Phospat 3 cartridge filter for phosphate removal, • 2 x AquaForte Dosatech for dosing Phosfree (liquid phosphate remover) and Microbe-Lift bacteria, • 1 x distribution box with 6 sockets, 16A fuse and 30mA RCD.